ThermTec Ibex 320L Thermal Riflescope with LRF

Aprašymas

ThermTec Ibex 320L Thermal Riflescope with Integrated Laser Rangefinder

384 × 288 thermal sensor, 20 mm F0.9 lens and built in ballistic calculator

ThermTec Ibex 320L is a thermal imaging riflescope for hunting and wildlife observation. It combines a 384 × 288 thermal sensor with a 20 mm F0.9 objective lens, NETD <18 mK sensitivity and a 50 Hz refresh rate.

The Ibex 320L provides 2.1× base magnification and a wide 13.1° × 9.8° field of view. Its integrated laser rangefinder measures distances up to 1,000 m, while the built in ballistic calculator supports aiming corrections based on distance and your configured ballistic profile.

Thermal Super Resolution, ThermTec AI Calibration and a central focus control support detailed observation and convenient image adjustment. The scope weighs approximately 720 g.

Wide Field of View for Detection and Tracking

The ThermTec Ibex 320L offers a field of view covering approximately 23.04 × 17.28 m at a distance of 100 m. This viewing area helps you scan your surroundings and follow moving animals.

ThermTec specifies a thermal detection range of up to 1,000 m. Detection describes noticing a thermal subject. Recognising its species requires sufficient image detail and suitable viewing conditions.

384 × 288 Sensor with NETD <18 mK

The thermal detector has a resolution of 384 × 288 pixels and sensitivity below 18 mK. This sensitivity helps distinguish small temperature differences between an animal and its surroundings.

The 50 Hz refresh rate supports smooth viewing when the subject or scope moves.

2.1× Base Magnification and Thermal Super Resolution

The Ibex 320L features 2.1× base magnification and continuous digital zoom from 1× to 4×.

Thermal Super Resolution processes the thermal image to support detail during magnified viewing. Digital zoom enlarges the image without changing the detector’s native 384 × 288 resolution.

Integrated Laser Rangefinder up to 1,000 m

The laser rangefinder integrates into the scope housing and measures distances up to 1,000 m. It provides distance information for observation and ballistic calculations.

The laser measurement range and thermal detection range describe separate functions, even though both have a stated maximum of 1,000 m for this model.

Built in Ballistic Calculator

The ballistic calculator supports aiming corrections using distance measurements and the ballistic profile you configure.

Accurate results depend on the ammunition data and other profile settings you enter.

ThermTec AutoSight System

ThermTec AutoSight System, also called TASS, automatically returns the scope from higher digital zoom to minimum magnification after a shot. This restores a wider viewing area for following movement.

TASS requires recoil activated video, also called RAV, to be enabled.

1600 × 1200 AMOLED Display

The Ibex 320L features a 0.5 inch AMOLED display with a resolution of 1600 × 1200 pixels.

You can select a square or circular viewing format through the settings. These options change the image presentation rather than the lens’s optical field of view.

Central Focus Control

The central focusing drum provides an accessible way to adjust image sharpness during observation. Its position supports convenient operation while looking through the scope.

ThermTec AI Calibration

ThermTec AI Calibration adapts image correction to changing environmental conditions. It reduces the need for frequent shutter calibration and helps maintain a consistent thermal image.

Frequently Asked Questions

What is the ThermTec Ibex 320L?

The ThermTec Ibex 320L is a thermal riflescope with a 384 × 288 sensor, 20 mm F0.9 lens, integrated laser rangefinder and ballistic calculator.

What is the detection range of the Ibex 320L?

ThermTec specifies a thermal detection range of up to 1,000 m. This figure describes detection rather than species identification.

Does the Ibex 320L have a laser rangefinder?

Yes. The integrated laser rangefinder measures distances up to 1,000 m.

What magnification does the Ibex 320L offer?

The scope provides 2.1× base magnification and digital zoom from 1× to 4×.

Does the Ibex 320L support square and circular viewing formats?

Yes. You can select either format through the device settings.

What does TASS do?

TASS automatically restores minimum magnification after a shot, giving you a wider view. The function requires RAV to be enabled.